Experience the highest possible industrial protection with the fanless IP69K design of the VITAM-921 AP stainless steel industrial panel PC with M12 connectors. The PC is also expandable with optical bonding to ensure that this industrial computer continues to perform well, even in highly humid environments. This Aplex 21.5" industrial embedded PC from the VITAM series features a special stainless steel housing. This makes it resistant to high-pressure water jets and accumulating dust. This IP69K design makes the PC easy to clean and allows this hygienic panel PC to be operated entirely via the 7H rugged and scratch-resistant touchscreen with medical gloves. The industrial embedded panel PC is equipped with an industrial Intel® Core™ i3-6100U Processor, that enables the PC to save significantly more power compared to 6th generation Intel® Core™ i5 & i7 Haswell processors. Still, the processor has enough processing power to run the most demanding industrial applications. This industrial embedded panel PC can be equipped with up to 16 GB of 2133 MHz SO-DIMM DDR4 memory. The industrial Intel® Core™ i3-6100U Processor can be supplied for 7 years. This enables us to deliver your personal configuration to you for many years. In addition, this processor is compatible with various Windows operating systems that enables Windows 7 64 bit, Windows 8 64 bit and Windows 10 IoT 64 bit to be installed on this industrial embedded panel PC. This compatibility is the ideal system to run a wide variety of SCADA applications.
Hygiene is crucial in the chemical and pharmaceutical industries in such a working environment, embedded industrial computer systems need to be cleaned with harsh industrial detergents. Besides this property, it is important that the material has antibacterial properties. SUS316 stainless steel then offers a solution in such situations as it is resistant to most common industrial cleaning agents. The minimalist design with a single touch on/off button and a flat bezel design also allows optimal cleaning of this PC.
Mounting flexibility
The panel PC can be mounted in various ways using a swing arm, floor stand, YOKE mount and a VESA mount. In this way, this system can be used in the tightest workplaces.
Projected capacitive touch control
This 21.5" display with capacitive touch technology, allows the PC to be controlled with the display, eliminating the need for a keyboard & mouse to operate the industrial panel PC. This display comes standard with a 7H flat bezel screen with anti-scratch coating. This industrial system is operable with a finger touch/capacitive touch pen or with medical gloves.
Reduction of light reflection
The LCD is equipped with a surface coating as standard. This surface coating prevents computer eye strain, reduces light reflection on the screen from 10% to 2% and also blocks UV rays on the screen, protecting the LCD.
Always a clearly readable display
The 21.5" industrial panel PC display is equipped with an auto-dimming sensor this automatically adjusts the brightness of the screen to up to 1,000 nits based on the light conditions at the respective workstation.
Additional resistance to dirt & moisture
With optical bonding, an extra layer is placed between the touchscreen screen and the TFT LCD screen. By equipping the industrial panel PC with optical bonding, the reflection of sunlight is further reduced. In addition, the screen is also easy to read at very low temperatures because no condensation can form.
Transcend Industrie SSD
This Aplex industrial panel PC is equipped with a Transcend industrial 2.5 " SSD hard drive, this increases the responsiveness of the PC with an impressive bootloading and transfer time. The same speed cannot be achieved with a PC equipped with a mechanical hard drive. Equipped with 3D NAND Flash, the productivity of the SSD is increased. As it uses 256-bit AES, the SSD features End-to-end data protection and therefore also supports TCG Opal 2.0 security management solutions.
Protection against power surges
Aplex's industrial embedded PCs have a power range of DC 9~36V, providing extra flexibility and reliability when the power grid is unstable.
More Information
Display
Screen size
21,5"
Touchscreen type
Capacitive Touch
screen backlight
50000
Contrast Ratio
3000:1
Luminance (cd/m2)
300
Viewing Angle (H/V°)
178/178
Max screen resolution
1920 x 1080
Processor
Processor
Intel Core
Processor serie
Haswell
Base Frequency
2.3 GHz
Number of cores
2
chipset
SoC
Memory
Memory type
Soldered DDR4
Expansion
expansion slots
1 x Mini PCIe slot for WIFI/BT (optional)
Ports & Interfaces
LAN Interface
1
USB 2.0 ports
1
External I/O
USB:
- 1 x M12 8-pin for USB 2.0 with waterproof cap
Serial/Parallel:
- 1 x M12 8-pin COM1
- RS-232/422/485
- Default RS-232 with waterproof cap
LAN:
- 1 x M12 8-pin for LAN with waterproof cap
Power:
- 1 x M12 3-pin for DC power with waterproof cap / 1 x Power switch on the rear side / 1x Touch on/off button on the side
Optional:
- RFID Module design on the frontside
- 2 x M12 blank connectors for selecting 2 options below:
- 2 x USB 2.0
- 1 x USB 3.0
- 1 x LAN Port
- 1 x COM Port
- 1 x CAN Bus
POE capability
TB528E1U2UPOE (45W)
Storage
Storage Interface
1 x 2.5” HDD/SSD Space / 1 x mSATA slot onboard
Mechanical specifications
Dimensions
571 x 362 x 55
Casing
6 side IP66 / IP69
Mounting
VESA 100 x 100, Yoke mount
Product features
Weight
10 Kg
Electrical specifications
Input range
DC 9~36V
Power consumption
TBD
Environmental specification
Storage temperature
-30~70°C
Operating Temperature
0°C/+50°C
relative air humidity
10 to 90% @ 40°C, non- condensing
Certificates
certificates
CE / FCC CLASS A
Software support
Operating System
Windows 7 64 bit, Windows 8 64 bit & Windows 10 IoT 64 bit
