• Evaluation carrier board for Qseven 2.1 based Computer-on-Modules
• Broad range of interface options for design development flexibility
• Compliant with Qseven 2.1 specification by SGET
Expansion
expansion slots
• Two PCIe X1 slots
• Two card slots (full size / half size) - PCIe & USB; support all MC3 mPCIe cards
• SIM Card connected to both mPCIe
• microSD card socket from QSEVEN module
Ports & Interfaces
GPIO Interface
8x GPIO
serial ATA interface
1x slot (full size / half size ; SATA port)
Audio interface
Line-in and line-out 3.5 mm jack; Front Panel 2x5 Pin Header (2.54 mm), supporting both interfaces I2S and HDA selectable by jumper.
External I/O
• 1x Gbit-Ethernet port
• 2x USB 3.0
• 1x μUSB connector for On The Go (OTG)
• HDMI connector from QSEVEN module
• DP++ connector from QSEVEN module
• COM RS232, 9-pin DSUB
Internal I/O
• 30-pin LVDS dual channel from QSEVEN module. Configurable 3.3 V / 5V voltage levels of
power for different panels via jumper
• Backlight PWM and power. Configurable 12 V/ 5 V voltage levels of backlight power for different panels via jumper. Maximum Power is 12 W continuous. If the selected panel exceeds, the provided power by this carrier evaluation of the QSEVEN module with LVDS can still be done with external panel power.
• eDP connector, shared with LVDS as an option selectable by jumper. PWR Out must provide +3.3 V +/-10 % with a maximum current of 500 mA and a minimum power capability of 1.5W.
• 1x slot (full size / half size ; SATA port)
• One dual-channel LVDS. This is muxed with eDP0/eDP1 (jumper selectable) as per Qseven specification
• Two PCIe X1 slots
• Two card slots (full size / half size) - PCIe & USB; support all MC3 mPCIe cards
• SIM Card connected to both mPCIe
• microSD card socket from QSEVEN module
• CAN interface
• SMD LEDs for storage activity, board status, device and power status (power good)
Storage
Storage Interface
SD Card, mSATA, SATA
Mechanical specifications
Dimensions
200 x 210 mm
Electrical specifications
Input range
12 V DC power connector for powering carrier and module 5 V. Separate input power connector for module with voltage range: 3.0 V to 5.25 V DC
Environmental specification
Storage temperature
-40°C to +85°C
Operating Temperature
-40°C/+85°C
relative air humidity
Storage: Relative humidity (non-condensing) 93 % at 40°C
Certificates
standards
• Electromagnetic Compatibility (EMC) and Interference: EMC Emission EN 55032 Class B, FCC part 15 Class B
• Shock/ Vibration/ Bump EMC Emission: IEC/EN60068-2-64, IEC/EN60068-2-27
• RoHS II Compliance: The product will comply to the European Council Restriction of Hazardous Substances (RoHS) II Directive on the approximation of the laws of the member states relating to Directive 20011/65/EU or the last status thereof.
• Safety: Component recognition to EN 62368-1
